NCV7361A Series

Voltage Regulator with Integrated LIN Transceiver

Catalog

Voltage Regulator with Integrated LIN Transceiver

Part	Operating Temperature [Max]	Operating Temperature [Min]	Control Features	Output Type	Number of Regulators	Grade	Current - Quiescent (Iq)	Qualification	Voltage - Input (Max) [Max]	Current - Output	Supplier Device Package	Mounting Type	Protection Features	Output Configuration	Voltage Dropout (Max) [Max]	Package / Case	Package / Case [y]	Package / Case [x]	Voltage - Output (Min/Fixed)
ON Semiconductor NCV7361ADG	125 °C	-40 °C	Enable Reset	1.81 mOhm	1	Automotive	110 µA	AEC-Q100	18 V	50 mA	8-SOIC	Surface Mount	Over Current Over Temperature	Positive	0.5 V	8-SOIC	3.9 mm	0.154 in	5 V
ON Semiconductor NCV7361ADR2	125 °C	-40 °C	Enable Reset	1.81 mOhm	1	Automotive	110 µA	AEC-Q100	18 V	50 mA	8-SOIC	Surface Mount	Over Current Over Temperature	Positive	0.5 V	8-SOIC	3.9 mm	0.154 in	5 V

Catalog

Voltage Regulator with Integrated LIN Transceiver

Key Features

• Operating Voltage VSUP = 5.5 to 18 V

• Very Low Standby Current Consumption < 110 uA in Normal Mode (< 50 uA in Sleep Mode)

• PNP Bipolar Transistor Driver

• Slew Rate Control and Wave Shaping for Best EMC Behavior

• BUS Input Voltage 24 V to 30 V (Independent of VSUP)

• WakeUp by LIN BUS and Startup Capable Independent of EN Voltage Level

• Baud Rate up to 20 kBaud

• Compatible to LIN Specification 1.3, 2.0 and SAE J2602

• Compatible to ISO9141 Functions

• Regulator Output Voltage 5.0 V +/-2%

• Regulator Output Current Max. 50 mA

• Regulator Output Current Limit

• Regulator Overtemperature Shutdown

• Reset Time 100 ms and Reset Threshold Voltage 4.65 V

• CMOS Compatible Interface to Microcontroller

• Load Dump Protected (40 V Peak)

• Resistant Against Transient Pulses According to ISO 7637 at Pin VSUP, BUS and EN

• NCV Prefix for Automotive and Other Applications Requiring Site and Change Control

Description

The NCV7361A consists of a low drop voltage regulator, 5.0 V/50 mA and a LIN bus transceiver. The LIN transceiver is suitable for LIN bus systems compatible to LIN−Protocol Specification Rev. 1.3, 2.0 and SAE J2602. The combination of voltage regulator and bus transceiver make it ideal for a powerful and inexpensive cost effective slave node in a LIN Bus system.