TPS62177 Series

28V, 0.5A Step-Down Converter with SNOOZE Mode

Catalog

28V, 0.5A Step-Down Converter with SNOOZE Mode

Part	Function	Voltage - Input (Max) [Max]	Current - Output	Voltage - Input (Min) [Min]	Synchronous Rectifier	Topology	Output Type	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case	Number of Outputs	Mounting Type	Supplier Device Package	Voltage - Output (Min/Fixed)	Output Configuration	Frequency - Switching
Texas Instruments TPS62177DQCT	Step-Down	28 V	500 mA	4.75 V		Buck	1.81 mOhm	85 °C	-40 °C	10-WFDFN Exposed Pad	1	Surface Mount	10-WSON (3x2)	3.3 V	Positive	1 MHz
Texas Instruments TPS62177DQCR	Step-Down	28 V	500 mA	4.75 V		Buck	1.81 mOhm	85 °C	-40 °C	10-WFDFN Exposed Pad	1	Surface Mount	10-WSON (3x2)	3.3 V	Positive	1 MHz

Catalog

28V, 0.5A Step-Down Converter with SNOOZE Mode

Key Features

• DCS-Control™ TopologyInput Voltage Range 4.75 V to 28 VQuiescent Current Typically 4.8 µA (Sleep Mode)100% Duty Cycle ModeActive Output DischargePower Good OutputOutput Current of 500 mAOutput Voltage Range 1 VDC to 6 VSwitching Frequency of Typically 1 MHzSeamless Power Save Mode TransitionUndervoltage LockoutShort Circuit ProtectionOver Temperature ProtectionAvailable in 2-mm × 3-mm 10-pin WSON PackageDCS-Control™ TopologyInput Voltage Range 4.75 V to 28 VQuiescent Current Typically 4.8 µA (Sleep Mode)100% Duty Cycle ModeActive Output DischargePower Good OutputOutput Current of 500 mAOutput Voltage Range 1 VDC to 6 VSwitching Frequency of Typically 1 MHzSeamless Power Save Mode TransitionUndervoltage LockoutShort Circuit ProtectionOver Temperature ProtectionAvailable in 2-mm × 3-mm 10-pin WSON Package

Description

The TPS6217x is a high efficiency synchronous step-down DC/DC converter, based on the DCS-Control™ topology. With a wide operating input voltage range of 4.75 V to 28 V, the device is ideally suited for systems powered from multi cell Li-Ion as well as 12 V and even higher intermediate supply rails, providing up to 500-mA output current. The TPS6217x automatically enters power save mode at light loads, to maintain high efficiency across the whole load range. As well, it features a sleep mode to supply applications with advanced power save modes like ultra low power micro controllers. The power good output may be used for power sequencing and/or power on reset. The device features a typical quiescent current of 22 µA in normal mode and 4.8 µA in sleep mode. In sleep mode, the efficiency at very low load currents can be increased by as much as 20%. In shutdown mode, the shutdown current is less than 2 µA and the output is actively discharged. The TPS6217x, available in an adjustable and a fixed output voltage version, is packaged in a small 2-mm × 3-mm 10-pin WSON package. The TPS6217x is a high efficiency synchronous step-down DC/DC converter, based on the DCS-Control™ topology. With a wide operating input voltage range of 4.75 V to 28 V, the device is ideally suited for systems powered from multi cell Li-Ion as well as 12 V and even higher intermediate supply rails, providing up to 500-mA output current. The TPS6217x automatically enters power save mode at light loads, to maintain high efficiency across the whole load range. As well, it features a sleep mode to supply applications with advanced power save modes like ultra low power micro controllers. The power good output may be used for power sequencing and/or power on reset. The device features a typical quiescent current of 22 µA in normal mode and 4.8 µA in sleep mode. In sleep mode, the efficiency at very low load currents can be increased by as much as 20%. In shutdown mode, the shutdown current is less than 2 µA and the output is actively discharged. The TPS6217x, available in an adjustable and a fixed output voltage version, is packaged in a small 2-mm × 3-mm 10-pin WSON package.