TLC5924 Series

16-channel LED driver w/dot correction & pre-charge FET

Catalog

16-channel LED driver w/dot correction & pre-charge FET

Part	Voltage - Output	Applications	Voltage - Supply (Min) [Min]	Package / Case	Mounting Type	Type	Number of Outputs	Voltage - Supply (Max)	Supplier Device Package	Current - Output / Channel	Frequency	Operating Temperature [Max]	Operating Temperature [Min]	Topology	Package / Case [x]	Package / Case [y]
Texas Instruments TLC5924RHBTG4	15 VDC	Backlight	3 V	32-VFQFN Exposed Pad	Surface Mount	Linear	16	5.5 V	32-VQFN (5x5)	80 mA	30 MHz	85 °C	-40 °C	Shift Register
Texas Instruments TLC5924DAPR	15 VDC	Backlight	3 V	32-PowerTSSOP	Surface Mount	Linear	16	5.5 V	32-HTSSOP	80 mA	30 MHz	85 °C	-40 °C	Shift Register	0.24 in	6.1 mm
Texas Instruments TLC5924RHBT	15 VDC	Backlight	3 V	32-VFQFN Exposed Pad	Surface Mount	Linear	16	5.5 V	32-VQFN (5x5)	80 mA	30 MHz	85 °C	-40 °C	Shift Register
Texas Instruments TLC5924DAP	15 VDC	Backlight	3 V	32-PowerTSSOP	Surface Mount	Linear	16	5.5 V	32-HTSSOP	80 mA	30 MHz	85 °C	-40 °C	Shift Register	0.24 in	6.1 mm

Catalog

16-channel LED driver w/dot correction & pre-charge FET

Key Features

• 16 ChannelsDrive Capability0 to 80 mA (Constant–Current Sink)Constant Current Accuracy: ±1% (typical)Serial Data InterfaceFast Switching Output: Tr/ Tf= 10ns (typical)CMOS Level Input/Output30 MHz Data Transfer RateVCC= 3.0 V to 5.5 VOperating Temperature = –40°C to 85°CLED Supply Voltage up to 17 V32–pin HTSSOP(PowerPAD) and QFN PackagesDot Correction7 bit (128 Steps)individual adjustable for each channelControlled In–Rush CurrentPre–Charge FETError InformationLOD: LED Open DetectionTEF: Thermal Error FlagAPPLICATIONSMonocolor, Multicolor, Fullcolor LED DisplayMonocolor, Multicolor LED SignboardDisplay BacklightingMulticolor LED lighting applicationsPowerPAD is a trademark of Texas Instruments.16 ChannelsDrive Capability0 to 80 mA (Constant–Current Sink)Constant Current Accuracy: ±1% (typical)Serial Data InterfaceFast Switching Output: Tr/ Tf= 10ns (typical)CMOS Level Input/Output30 MHz Data Transfer RateVCC= 3.0 V to 5.5 VOperating Temperature = –40°C to 85°CLED Supply Voltage up to 17 V32–pin HTSSOP(PowerPAD) and QFN PackagesDot Correction7 bit (128 Steps)individual adjustable for each channelControlled In–Rush CurrentPre–Charge FETError InformationLOD: LED Open DetectionTEF: Thermal Error FlagAPPLICATIONSMonocolor, Multicolor, Fullcolor LED DisplayMonocolor, Multicolor LED SignboardDisplay BacklightingMulticolor LED lighting applicationsPowerPAD is a trademark of Texas Instruments.

Description

The TLC5924 is a 16 channel constant–current sink driver. Each channel has a On/Off state and a 128–step adjustable constant current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels and other LED drivers. Both dot correction and On/Off state are accessible via a serial data interface. A single external resistor sets the maximum current of all 16 channels. Each constant–current output has a pre–charge FET that enables an improvement in image quality of the dynamic–drive LED display. The TLC5924 features two error information circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an over–temperature condition. The TLC5924 is a 16 channel constant–current sink driver. Each channel has a On/Off state and a 128–step adjustable constant current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels and other LED drivers. Both dot correction and On/Off state are accessible via a serial data interface. A single external resistor sets the maximum current of all 16 channels. Each constant–current output has a pre–charge FET that enables an improvement in image quality of the dynamic–drive LED display. The TLC5924 features two error information circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an over–temperature condition.