
AFE5807 Series
8-channel analog front end with passive CW mixer for ultrasound
Manufacturer: Texas Instruments
Catalog
8-channel analog front end with passive CW mixer for ultrasound
Key Features
• 8-Channel Complete Analog Front-EndLNA, VCAT, PGA, LPF,ADC, and CW MixerProgrammable Gain Low-Noise Amplifier (LNA)24/18/12 dBGain0.25/0.5/1 VPPLinear Input Range0.63/0.7/0.9 nV/rtHz IRN (Low Noise Mode)0.99/1.0/1.05 nV/rtHz IRN (Low Power Mode)Programmable Active Termination40 dB Low Noise Voltage Controlled Attenuator (VCAT)24/30 dB Programmable Gain Amplifier (PGA)3rdOrder Linear Phase Low-Pass Filter (LPF)10, 15, 20, 30 MHz12-bit Analog to Digital Converter (ADC)70 dBFS SNR at 80 MSPSLVDS OutputsNoise/Power Optimizations (Full Chain)117 mW/CH at 1.05 nV/rtHz, 80 MSPS159 mW/CH at 0.75 nV/rtHz, 80 MSPS80 mW/CH at CW ModeExcellent Device-to-Device Gain Matching±0.5 dB(typical) and ±1 dB(max)Low Harmonic DistortionFast and Consistent Overload RecoveryPassive Mixer for Continuous Wave Doppler(CWD)Low Close-in Phase Noise –156 dBc/Hzat 1 KHz off 2.5 MHz CarrierPhase Resolution of 1/16&lamba;Support 16X, 8X, 4X and 1X CW Clocks12dB Suppression on 3rdand 5thHarmonicsFlexible Input ClocksSmall Package: 15 mm × 9 mm, 135-BGAAPPLICATIONSMedical Ultrasound ImagingNondestructive Evaluation Equipments8-Channel Complete Analog Front-EndLNA, VCAT, PGA, LPF,ADC, and CW MixerProgrammable Gain Low-Noise Amplifier (LNA)24/18/12 dBGain0.25/0.5/1 VPPLinear Input Range0.63/0.7/0.9 nV/rtHz IRN (Low Noise Mode)0.99/1.0/1.05 nV/rtHz IRN (Low Power Mode)Programmable Active Termination40 dB Low Noise Voltage Controlled Attenuator (VCAT)24/30 dB Programmable Gain Amplifier (PGA)3rdOrder Linear Phase Low-Pass Filter (LPF)10, 15, 20, 30 MHz12-bit Analog to Digital Converter (ADC)70 dBFS SNR at 80 MSPSLVDS OutputsNoise/Power Optimizations (Full Chain)117 mW/CH at 1.05 nV/rtHz, 80 MSPS159 mW/CH at 0.75 nV/rtHz, 80 MSPS80 mW/CH at CW ModeExcellent Device-to-Device Gain Matching±0.5 dB(typical) and ±1 dB(max)Low Harmonic DistortionFast and Consistent Overload RecoveryPassive Mixer for Continuous Wave Doppler(CWD)Low Close-in Phase Noise –156 dBc/Hzat 1 KHz off 2.5 MHz CarrierPhase Resolution of 1/16&lamba;Support 16X, 8X, 4X and 1X CW Clocks12dB Suppression on 3rdand 5thHarmonicsFlexible Input ClocksSmall Package: 15 mm × 9 mm, 135-BGAAPPLICATIONSMedical Ultrasound ImagingNondestructive Evaluation Equipments
Description
AI
The AFE5807 is an integrated Analog Front-End (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5807 integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. It also enables users to select one of various power/noise combinations to optimize system performance. Therefore, the AFE5807 is a suitable ultrasound analog front end solution not only for high-end systems, but also for portable systems.
The AFE5807 contains eight channels of voltage controlled amplifier (VCA), 12-bit Analog-to-Digital Converter (ADC), and CW mixer. The VCA includes Low noise Amplifier (LNA), Voltage controlled Attenuator(VCAT), Programmable Gain Amplifier (PGA), and Low-Pass Filter (LPF). The LNA gain is programmable to support 250 mVPPto 1 VPPinput signals. Programmable active termination is also supported by the LNA. The ultra-low noise VCAT provides an attenuation control range of 40 dB and improves overall low gain SNR which benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. Before the ADC, a LPF can be configured as 10 MHz, 15 MHz, 20 MHz or 30 MHz to support ultrasound applications with different frequencies. The high-performance 12 bit/80 MSPS ADC in the AFE5807 achieves 70 dBFS SNR. It ensures excellent SNR at low chain gain. The ADC’s LVDS outputs enable flexible system integration desired for miniaturized systems. The AFE5807 also integrates a low power passive mixer and a low noise summing amplifier to accomplish on-chip CWD beamformer. 16 selectable phase-delays can be applied to each analog input signal. Meanwhile a unique 3rdand 5thorder harmonic suppression filter is implemented to enhance CW sensitivity.
The AFE5807 is available in a 15mm × 9mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. It is also pin-to-pin compatible to the AFE5808, AFE5803, and AFE5808A. In addtion, AFE5809 is another member with enhanced digital demodulation features in this family.
The AFE5807 is an integrated Analog Front-End (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5807 integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. It also enables users to select one of various power/noise combinations to optimize system performance. Therefore, the AFE5807 is a suitable ultrasound analog front end solution not only for high-end systems, but also for portable systems.
The AFE5807 contains eight channels of voltage controlled amplifier (VCA), 12-bit Analog-to-Digital Converter (ADC), and CW mixer. The VCA includes Low noise Amplifier (LNA), Voltage controlled Attenuator(VCAT), Programmable Gain Amplifier (PGA), and Low-Pass Filter (LPF). The LNA gain is programmable to support 250 mVPPto 1 VPPinput signals. Programmable active termination is also supported by the LNA. The ultra-low noise VCAT provides an attenuation control range of 40 dB and improves overall low gain SNR which benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. Before the ADC, a LPF can be configured as 10 MHz, 15 MHz, 20 MHz or 30 MHz to support ultrasound applications with different frequencies. The high-performance 12 bit/80 MSPS ADC in the AFE5807 achieves 70 dBFS SNR. It ensures excellent SNR at low chain gain. The ADC’s LVDS outputs enable flexible system integration desired for miniaturized systems. The AFE5807 also integrates a low power passive mixer and a low noise summing amplifier to accomplish on-chip CWD beamformer. 16 selectable phase-delays can be applied to each analog input signal. Meanwhile a unique 3rdand 5thorder harmonic suppression filter is implemented to enhance CW sensitivity.
The AFE5807 is available in a 15mm × 9mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. It is also pin-to-pin compatible to the AFE5808, AFE5803, and AFE5808A. In addtion, AFE5809 is another member with enhanced digital demodulation features in this family.