HMC574 Series

GaAs MMIC 5 Watt T/R Switch DC - 3 GHz

Manufacturer: Analog Devices Inc./Maxim Integrated

Catalog

GaAs MMIC 5 Watt T/R Switch DC - 3 GHz

Part	Operating Temperature [Max]	Operating Temperature [Min]	Test Frequency	Circuit	Topology	Supplier Device Package	Frequency Range [Max]	Frequency Range [Min]	P1dB	Impedance	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case	Package / Case	IIP3	Isolation	RF Type	Mounting Type	Insertion Loss	For Use With/Related Products	Supplied Contents	Frequency [Max]	Frequency [Min]	Contents	Utilized IC / Part	Type
Analog Devices Inc./Maxim Integrated HMC574AMS8ETR	85 °C	-40 C	3 GHz	SPDT	Reflective	8-MSOP	3 GHz	0 Hz	39 dBm	50 Ohms	3 V	8 V	8-MSOP 8-TSSOP	0.118 in 3 mm Width	63 dBm	20 dB	WiMAX WLAN	Surface Mount	0.5 dB
Analog Devices Inc./Maxim Integrated EV1HMC574AMS8																				HMC574AMS8E	Board(s)	3 GHz	0 Hz	Board(s)	HMC574AMS8E	Switch SPDT
Analog Devices Inc./Maxim Integrated HMC574MS8E	85 °C	-40 C	3 GHz	SPDT	Reflective	8-MSOP	3 GHz	0 Hz	39 dBm	50 Ohms	3 V	8 V	8-MSOP 8-TSSOP	0.118 in 3 mm Width	65 dBm	20 dB	Cellular WLAN	Surface Mount	0.5 dB
Analog Devices Inc./Maxim Integrated HMC574MS8TR	85 °C	-40 C	3 GHz	SPDT	Reflective	8-MSOP	3 GHz	0 Hz	39 dBm	50 Ohms	3 V	8 V	8-MSOP 8-TSSOP	0.118 in 3 mm Width	65 dBm	20 dB	Cellular WLAN	Surface Mount	0.5 dB
Analog Devices Inc./Maxim Integrated HMC574MS8ETR	85 °C	-40 C	3 GHz	SPDT	Reflective	8-MSOP	3 GHz	0 Hz	39 dBm	50 Ohms	3 V	8 V	8-MSOP 8-TSSOP	0.118 in 3 mm Width	65 dBm	20 dB	Cellular WLAN	Surface Mount	0.5 dB
Analog Devices Inc./Maxim Integrated HMC574MS8	85 °C	-40 C	3 GHz	SPDT	Reflective	8-MSOP	3 GHz	0 Hz	39 dBm	50 Ohms	3 V	8 V	8-MSOP 8-TSSOP	0.118 in 3 mm Width	65 dBm	20 dB	Cellular WLAN	Surface Mount	0.5 dB

Catalog

GaAs MMIC 5 Watt T/R Switch DC - 3 GHz

Description

The HMC574MS8(E) is a low-cost SPDT switch in an 8-lead MSOP package for use in transmit/receive applications which require very low distortion at high incident power levels. The device can control signals from DC to 3 GHz and is especially suited for Cellular/3G infrastructure, WiMAX and WiBro applications with only 0.3 dB typical insertion loss. The design provides 5 watt power handling performance and +65 dBm third order intercept at +8 Volt bias. RF1 and RF2 are reflective shorts when "Off".ApplicationsCellular/3G InfrastructurePrivate Mobile Radio HandsetsWLAN, WiMAX & WiBroAutomotive TelematicsTest Equipment