NCV8518A Series

250 mA LDO Linear Voltage Regulator with Watchdog, Wake Up, Reset , Delay and Enable

Catalog

250 mA LDO Linear Voltage Regulator with Watchdog, Wake Up, Reset , Delay and Enable

Part	Output Type	Package / Case	Package / Case	Package / Case	Supplier Device Package	Qualification	Output Configuration	Voltage Dropout (Max) [Max]	Grade	Voltage - Output (Min/Fixed)	Control Features	Current - Quiescent (Iq)	Current - Output	Mounting Type	Voltage - Input (Max) [Max]	Number of Regulators	Package / Case [custom]	Package / Case [custom]	Protection Features	Operating Temperature [Max]	Operating Temperature [Min]
ON Semiconductor NCV8518BPDR2G	1.81 mOhm	0.154 in	8-SOIC	3.9 mm	8-SOIC-EP	AEC-Q100	Positive	0.75 V	Automotive	5 V	Enable Reset Wake-Up Watchdog	150 çA	250 mA	Surface Mount	45 V	1
ON Semiconductor NCV8518APDG	1.81 mOhm	0.154 in	8-SOIC	3.9 mm	8-SOIC-EP	AEC-Q100	Positive	0.75 V	Automotive	5 V	Enable Reset Wake-Up Watchdog	150 çA	250 mA	Surface Mount	45 V	1
ON Semiconductor NCV8518CPWR2G	1.81 mOhm		16-SOIC Exposed Pad		16-SOIC	AEC-Q100	Positive	0.75 V	Automotive	5 V	Enable Reset Wake-Up Watchdog	85 µA	250 mA	Surface Mount		1	0.295 in	7.5 mm	Over Current Over Temperature Short Circuit	150 °C	-40 °C
ON Semiconductor NCV8518PDR2G		0.154 in	8-SOIC	3.9 mm	8-SOIC-EP	AEC-Q100			Automotive				250 mA	Surface Mount		1
ON Semiconductor NCV8518APDR2G	1.81 mOhm	0.154 in	8-SOIC	3.9 mm	8-SOIC-EP	AEC-Q100	Positive	0.75 V	Automotive	5 V	Enable Reset Wake-Up Watchdog	150 çA	250 mA	Surface Mount	45 V	1
ON Semiconductor NCV8518BPWR2G	1.81 mOhm		16-SOIC Exposed Pad		16-SOIC	AEC-Q100	Positive	0.75 V	Automotive	5 V	Enable Reset Wake-Up Watchdog	150 çA	250 mA	Surface Mount	45 V	1	0.295 in	7.5 mm

Catalog

250 mA LDO Linear Voltage Regulator with Watchdog, Wake Up, Reset , Delay and Enable

Key Features

• Output Voltage Option: 5.0 V

• Output Voltage accuracy: ±2%

• Protection Features:- Thermal Shutdown- Current Limitation

• AEC-Q100 Grade 1 Qualified and PPAP Capable

• Output current up to 250 mA

• Low Dropout Voltage

• Low Quiescent Current of 70 µA

• Low Sleep Mode Current less than 1.0 µA

• Micropower Compatible Control Function:- ENABLE- Watchdog- RESET- Wake Up

Description

The NCV8518A device is a precision micropower voltage regulator. It has a fixed output voltage of 5.0 V and regulates within ±2%.Microprocessor control logic includes an active RESET (with DELAY), wakeup, watchdog and enable.The NCV8518A Wakeup function brings the microprocessor out of Sleep mode. The microprocessor in turn signals its Wakeup status back to the NCV8518A by issuing a Watchdog signal.The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence, during normal operation if the output voltage drops below the regulation limits or if the regulator does not receive a Watchdog signal within a Wakeup period.The Watchdog logic function monitors an input signal (WDI) from the microprocessor. The device responds to the falling edge of the Watchdog signal which it expects at least once during each Wakeup period.Enable is a standard TTL and CMOS logic compatible input that can be used to turn the regulator on or off. In the disabled/shutdown state, the pass transistor is off and total quiescent current is less than 1 µA.Also encompassed in this device are safety features such as thermal shutdown and short circuit protection, an important consideration in automotive environments.NCV8518A is pin for pin compatible with NCV8518 and can replace this device in any new design.