FSTU32160 Series

16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch with -2 V Under-Shoot Protection

Catalog

16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch with -2 V Under-Shoot Protection

Part	Mounting Type	Supplier Device Package	Package / Case	Package / Case	Package / Case	Voltage Supply Source	Voltage - Supply [Max]	Voltage - Supply [Min]	Independent Circuits	Type	Circuit	Circuit	Operating Temperature [Max]	Operating Temperature [Min]
ON Semiconductor FSTU32160AMTDX	Surface Mount	56-TSSOP	6.1 mm	0.24 in	56-TFSOP	Single Supply	5.5 V	4 V	1	Multiplexer/Demultiplexer	16	1:2	85 °C	-40 °C
ON Semiconductor FSTU32160MTDX	Surface Mount	56-TSSOP	6.1 mm	0.24 in	56-TFSOP	Single Supply	5.5 V	4 V	1	Multiplexer/Demultiplexer	16	1:2	85 °C	-40 °C
ON Semiconductor FSTU32160AMTD	Surface Mount	56-TSSOP	6.1 mm	0.24 in	56-TFSOP	Single Supply	5.5 V	4 V	1	Multiplexer/Demultiplexer	16	1:2	85 °C	-40 °C

Catalog

16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch with -2 V Under-Shoot Protection

Key Features

• Undershoot hardened to -2V (A and B Ports).

• Slower Output Enable times prevent signal disruption

• 4ohm switch connection between two ports.

• Minimal propagation delay through the switch.

• Low lCC.

• Zero bounce in flow-through mode.

• Control inputs compatible with TTL level.

• See Applications Note AN-5008 for details

Description

The ON Semiconductor switch FSTU32160 is a 16-bit to 32-bit high-speed CMOS TTL-compatible multiplexer/demultiplexer bus switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.The device can be used in applications where two buses need to be addressed simultaneously. The FSTU32160 is designed so that the A Port demultiplexes into B1or B2or both. The A and B Ports have "undershoot hardened" circuit protection to support an extended range to 2.0V below ground. The integrated undershoot hardened circuit senses undershoot at the I/Os, and responds by preventing voltage differentials from developing and turning on the switch.Two select (S1, S2) inputs provide switch enable control. When S1, S2are HIGH, the device precharges the B Port to a selectable bias voltage (Bias V) to minimize live insertion noise.