MAX13058E Series

The MAX13055E–MAX13058E 8-channel, bidirectional level translators provide the level shifting necessary for 100Mbps data transfer in multivoltage systems. The MAX13055E–MAX13058E are ideal for level translation in systems with 8 channels. Externally applied voltages, VCCand VL, set the logic levels on either side of the device. Logic-high signals presented on the VLside of the device appear as a logic-high signal on the VCCside of the device and vice versa.The MAX13055E–MAX13058E operate at full speed with external drivers that source as little as 4mA output current or larger. Each input/output (I/O) channel is pulled up to VCCor VLby an internal 40µA current source, allowing the MAX13055E–MAX13058E to be driven by either push-pull or open-drain drivers.The MAX13055E–MAX13058E feature an enable (EN) input to place the device into a low-power shutdown mode when driven low. In addition, the MAX13055E–MAX13058E feature an automatic shutdown mode that disables the part when VCCis less than VL. Each device has a different I/O VL_and I/O VCC_state during shutdown mode (see theOrdering Information/Selector Guidein the full data sheet).The MAX13055E–MAX13058E operate with VCCvoltages from +2.2V to +3.6V and VLvoltages from +1.62V to +3.2V, making them ideal for data transfer between low-voltage ASIC/PLDs and higher voltage systems. The MAX13055E–MAX13058E are available in 0.4mm pitch, 24-bump WLP and 28-pin TQFN (3.5mm x 5.5mm) packages. The MAX13055E–MAX13058E operate over the extended -40°C to +85°C temperature range.ApplicationsCamera ModulesCell PhonesGPSLow-Voltage ASIC LevelTranslationPortable CommunicationDevicesPortable POS SystemsSmart Card ReadersTelecomm Equipment