TPS1211-Q1 Series

Automotive, 3.5V to 45V high-side driver with protection and diagnostics

Catalog

Automotive, 3.5V to 45V high-side driver with protection and diagnostics

Part	Supplier Device Package	Number of Outputs	Fault Protection	Interface	Switch Type	Current - Output (Max) [Max]	Grade	Operating Temperature [Min]	Operating Temperature [Max]	Voltage - Load [Max]	Voltage - Load [Min]	Voltage - Supply (Vcc/Vdd)	Ratio - Input:Output [custom]	Rds On (Typ)	Mounting Type	Input Type	Features	Output Configuration	Qualification	Package / Case	Package / Case [x]	Package / Case	Package / Case [y]	Output Type
Texas Instruments TPS12112AQDGXRQ1	19-VSSOP	1	Current Limiting (Fixed) Over Temperature Over Voltage Reverse Battery UVLO	On/Off	General Purpose	3.7 A	Automotive	-40 °C	125 °C	40 V	3.5 V		1:1	0.47 mOhm	Surface Mount	Non-Inverting	Load Discharge Slew Rate Controlled Status Flag	High Side	AEC-Q100	20-TFSOP	0.118 in	19 Leads	3 mm	N-Channel
Texas Instruments TPS12111LQDGXRQ1	19-VSSOP	1	Current Limiting (Fixed) Over Temperature Over Voltage Reverse Battery Reverse Current Short Circuit UVLO	On/Off	General Purpose	4 A	Automotive	-40 °C	125 ¯C				1:1		Surface Mount	Differential	Load Discharge Slew Rate Controlled Status Flag	High Side	AEC-Q100	20-TFSOP	0.118 in	19 Leads	3 mm	N-Channel

Catalog

Automotive, 3.5V to 45V high-side driver with protection and diagnostics

Key Features

• AEC-Q100 qualified with the following resultsDevice temperature grade 1: –40°C to +125°C ambient operating temperature rangeFunctional Safety-CapableDocumentation available to aid functional safety system design3.5V to 40V input range (45V absolute maximum)Output reverse polarity protection down to –30VIntegrated 12V charge pump with 100µA capacityLow 0.9µA shutdown current (EN/UVLO = Low)Strong pullup (3.7A) and pulldown (4A) gate driverDrives external back-to-back N-channel MOSFETsVariant with integrated pre-charge switch driver (TPS12111-Q1) to drive capacitive loadsTwo-level adjustable overcurrent protection (IWRN, ISCP) with adjustable response time (TMR) and fault flag output (FLT_I)Fast short-circuit protection: 1.2µs (TPS12111-Q1, TPS12112-Q1), 4µs (TPS12110-Q1)Accurate analog current monitor output (IMON): ±2% at 30mV (VSNS)Accurate, adjustable undervoltage lockout (UVLO) and overvoltage protection (OV): < ±2%Remote overtemperature sensing (DIODE) and protection with fault flag output (FLT_T)Pin-to-pin compatible withTPS4811-Q1AEC-Q100 qualified with the following resultsDevice temperature grade 1: –40°C to +125°C ambient operating temperature rangeFunctional Safety-CapableDocumentation available to aid functional safety system design3.5V to 40V input range (45V absolute maximum)Output reverse polarity protection down to –30VIntegrated 12V charge pump with 100µA capacityLow 0.9µA shutdown current (EN/UVLO = Low)Strong pullup (3.7A) and pulldown (4A) gate driverDrives external back-to-back N-channel MOSFETsVariant with integrated pre-charge switch driver (TPS12111-Q1) to drive capacitive loadsTwo-level adjustable overcurrent protection (IWRN, ISCP) with adjustable response time (TMR) and fault flag output (FLT_I)Fast short-circuit protection: 1.2µs (TPS12111-Q1, TPS12112-Q1), 4µs (TPS12110-Q1)Accurate analog current monitor output (IMON): ±2% at 30mV (VSNS)Accurate, adjustable undervoltage lockout (UVLO) and overvoltage protection (OV): < ±2%Remote overtemperature sensing (DIODE) and protection with fault flag output (FLT_T)Pin-to-pin compatible withTPS4811-Q1

Description

The TPS1211-Q1 family is a 45V, smart high-side driver with protection and diagnostics. With wide operating voltage range of 3.5V–40V, the device is suitable for 12V system designs. The device has a strong 3.7A peak source (PU) and 4A peak sink (PD) gate driver that enables power switching using parallel FETs in high-current system designs. Use INP as the gate driver control input. The device has accurate current sensing (±2% at 30mV) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output. The TPS12111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode (EN/UVLO < 0.3V), the controller draws a total shutdown current of 0.9µA (typical). The TPS1211-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance. The TPS1211-Q1 family is a 45V, smart high-side driver with protection and diagnostics. With wide operating voltage range of 3.5V–40V, the device is suitable for 12V system designs. The device has a strong 3.7A peak source (PU) and 4A peak sink (PD) gate driver that enables power switching using parallel FETs in high-current system designs. Use INP as the gate driver control input. The device has accurate current sensing (±2% at 30mV) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output. The TPS12111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode (EN/UVLO < 0.3V), the controller draws a total shutdown current of 0.9µA (typical). The TPS1211-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance.