TPS4811-Q1 Series

Automotive, 3.5V to 100V high-side driver with protection and diagnostics

Catalog

Automotive, 3.5V to 100V high-side driver with protection and diagnostics

Part	Switch Type	Output Type	Voltage - Supply (Vcc/Vdd) [Min]	Voltage - Supply (Vcc/Vdd) [Max]	Ratio - Input:Output [custom]	Input Type	Fault Protection	Supplier Device Package	Features	Package / Case	Package / Case [x]	Package / Case	Package / Case [y]	Operating Temperature [Min]	Operating Temperature [Max]	Mounting Type	Current - Output (Max) [Max]	Number of Outputs	Grade	Qualification	Interface	Output Configuration
Texas Instruments TPS48110AQDGXRQ1	General Purpose	N-Channel	3.5 V	80 V	1:1	Differential	Current Limiting (Adjustable) Over Voltage Reverse Battery Reverse Current Short Circuit UVLO	19-VSSOP	Slew Rate Controlled Status Flag	20-TFSOP	0.118 in	19 Leads	3 mm	-40 °C	125 °C	Surface Mount	4 A	1	Automotive	AEC-Q100	On/Off	High Side

Catalog

Automotive, 3.5V to 100V high-side driver with protection and diagnostics

Key Features

• AEC-Q100 qualified with the following resultsDevice temperature grade 1: –40°C to +125°C ambient operating temperature rangeFunctional Safety-CapableDocumentation available to aid functional safety system design3.5V to 80V input range (100V absolute maximum)Output reverse polarity protection down to –30VIntegrated 12V charge pump with 100µA capacityLow 1.6µA shutdown current (EN/UVLO = Low)Strong pull up (3.7A) and pull down (4A) gate driverDrives external back-to-back N-channel MOSFETsVariant with integrated pre-charge switch driver (TPS48111-Q1) to drive capacitive loadsTwo-level adjustable overcurrent protection (IWRN, ISCP) with adjustable circuit breaker timer (TMR) and fault flag output (FLT_I)Fast short-circuit protection: 1.2µs (TPS48111-Q1), 4µs (TPS48110-Q1)Accurate analog current monitor output (IMON): ±2% at 30mV VSNSAccurate, adjustable undervoltage lockout (UVLO) and overvoltage protection (OV): < ±2%Remote overtemperature sensing (DIODE) and protection with fault flag output (FLT_T)AEC-Q100 qualified with the following resultsDevice temperature grade 1: –40°C to +125°C ambient operating temperature rangeFunctional Safety-CapableDocumentation available to aid functional safety system design3.5V to 80V input range (100V absolute maximum)Output reverse polarity protection down to –30VIntegrated 12V charge pump with 100µA capacityLow 1.6µA shutdown current (EN/UVLO = Low)Strong pull up (3.7A) and pull down (4A) gate driverDrives external back-to-back N-channel MOSFETsVariant with integrated pre-charge switch driver (TPS48111-Q1) to drive capacitive loadsTwo-level adjustable overcurrent protection (IWRN, ISCP) with adjustable circuit breaker timer (TMR) and fault flag output (FLT_I)Fast short-circuit protection: 1.2µs (TPS48111-Q1), 4µs (TPS48110-Q1)Accurate analog current monitor output (IMON): ±2% at 30mV VSNSAccurate, adjustable undervoltage lockout (UVLO) and overvoltage protection (OV): < ±2%Remote overtemperature sensing (DIODE) and protection with fault flag output (FLT_T)

Description

The TPS4811x-Q1 family is a 100V smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–80V, the device is suitable for 12V, 24V, and 48V system designs. It has a strong 3.7A peak source (PU) and 4A peak sink (PD) GATE driver that enables power switching using parallel FETs in high current system designs. Use INP as the gate driver control input. The device has accurate current sensing (±2%) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output. The TPS48111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode, the controller draws a total shutdown current of 1.6µA at 48V supply input. The TPS4811x-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance. The TPS4811x-Q1 family is a 100V smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–80V, the device is suitable for 12V, 24V, and 48V system designs. It has a strong 3.7A peak source (PU) and 4A peak sink (PD) GATE driver that enables power switching using parallel FETs in high current system designs. Use INP as the gate driver control input. The device has accurate current sensing (±2%) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output. The TPS48111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode, the controller draws a total shutdown current of 1.6µA at 48V supply input. The TPS4811x-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance.