CM1450 Series

6- and 8-Channel LCD & Camera EMI Filter Arrays with ESD Protection

Catalog

6- and 8-Channel LCD & Camera EMI Filter Arrays with ESD Protection

Part	Values	ESD Protection	Number of Channels	Applications	Attenuation Value	Center / Cutoff Frequency	Filter Order	Package / Case	Type	Mounting Type	Current	Size / Dimension [y]	Size / Dimension [x]	Size / Dimension [x]	Size / Dimension [y]	Technology	Resistance - Channel (Ohms)	Operating Temperature [Max]	Operating Temperature [Min]	Height [z]	Height [z]
ON Semiconductor CM1450-08CP	14 pF 17 nH		8	Data Lines for Mobile Devices	35 dB	137 MHz	5th	20-WFBGA WLCSP	Low Pass	Surface Mount	30 mA	1.38 mm	0.158 in	4.01 mm	0.054 in	LC (Pi)	18 Ohms	85 °C	-40 °C	0.7 mm	0.028 in

Catalog

6- and 8-Channel LCD & Camera EMI Filter Arrays with ESD Protection

Key Features

• Excellent attenuation of noise in the wireless carrier bands

• Chip Scale Package (CSP) features extremely low lead inductance for optimum filter and ESD performance

• ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge)

Description

The CM1450 comprises a family of inductor-capacitor (L-C) based EMI filter arrays with integrated ESD protection in a CSP form factor. The CM1450-06 and CM1450-08 are configured in 6 and 8 channel formats respectively. Each EMI filter channel of the CM1450 is implemented as a 5-pole L-C filter where the component values are 14pF-17nH-14pF-17nF-14pF. The CM1450's roll-off frequency at -10dB attenuation is 400MHz and can be used in applications where the data rates are as high as 160Mbps while providing greater than 35dB over the 800MHz to 2.7GHz frequency range. The parts integrate ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, exceeding the Level 4 requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV.