
TLC59731 Series
3-channel, 8-bit, PWM LED driver with Single-Wire Interface
Manufacturer: Texas Instruments
Catalog
3-channel, 8-bit, PWM LED driver with Single-Wire Interface
Key Features
• Three Sink Current ChannelsCurrent Capability:50 mA per ChannelGrayscale (GS) Control With PWM:8-Bit (256 Steps) With Simple GammaCorrectionSingle-Wire Interface (EasySet™)Power-Supply (VCC) Voltage Range:No Internal Shunt Regulator Mode:3 V to 5.5 VInternal Shunt Regulator Mode: 3 V to 6 VOUT Terminals Maximum Voltage: Up to 21 VIntegrated Shunt RegulatorData Transfer Maximum Rate:Bits per Second (bps): 600 kbpsInternal GS Clock Oscillator: 6 MHz (Typical)Display Repeat Rate: 3.1 kHz (Typical)Output Delay Switching to Prevent Inrush CurrentUnlimited Device CascadingOperating Temperature: –40°C to 85°CThree Sink Current ChannelsCurrent Capability:50 mA per ChannelGrayscale (GS) Control With PWM:8-Bit (256 Steps) With Simple GammaCorrectionSingle-Wire Interface (EasySet™)Power-Supply (VCC) Voltage Range:No Internal Shunt Regulator Mode:3 V to 5.5 VInternal Shunt Regulator Mode: 3 V to 6 VOUT Terminals Maximum Voltage: Up to 21 VIntegrated Shunt RegulatorData Transfer Maximum Rate:Bits per Second (bps): 600 kbpsInternal GS Clock Oscillator: 6 MHz (Typical)Display Repeat Rate: 3.1 kHz (Typical)Output Delay Switching to Prevent Inrush CurrentUnlimited Device CascadingOperating Temperature: –40°C to 85°C
Description
AI
The TLC59731 device is an easy-to-use, 3-channel, 50-mA sink current LED driver. The single-wire, 600-kbps serial interface (EasySet) provides a solution for minimizing wiring cost. The LED driver provides 8-bit pulse width modulation (PWM) resolution and a simple gamma correction feature. The display repeat rate is achieved at 3.1 kHz (typical) with an integrated 6-MHz grayscale (GS) clock oscillator. The driver also provides unlimited cascading capability.
Output sink current can be set by each external resistor connected to the OUTnterminal in series. The TLC59731 has an internal shunt regulator that can be used for higher VCC power-supply voltage applications.
The TLC59731 device is an easy-to-use, 3-channel, 50-mA sink current LED driver. The single-wire, 600-kbps serial interface (EasySet) provides a solution for minimizing wiring cost. The LED driver provides 8-bit pulse width modulation (PWM) resolution and a simple gamma correction feature. The display repeat rate is achieved at 3.1 kHz (typical) with an integrated 6-MHz grayscale (GS) clock oscillator. The driver also provides unlimited cascading capability.
Output sink current can be set by each external resistor connected to the OUTnterminal in series. The TLC59731 has an internal shunt regulator that can be used for higher VCC power-supply voltage applications.