Catalog
1080p Dual FPD-Link III to CSI-2 Deserializer
Key Features
• AEC-Q100 qualified with the following results:Device temperature grade 2: –40°C to +105°C ambient operating temperatureSupports pixel clock frequency up to 170 MHz for WUXGA (1920×1200) and 1080p60 resolutions with 24-bit color depth1-lane or 2-lane FPD-Link III interface with de-skew capabilityMIPI®D-PHY / CSI-2 transmitterCSI-2 output ports with selectable 2- or 4-lane operation, up to 1.3 Gbps each laneVideo formats: RGB888/666/565, YUV422/420, RAW8/10/12Programmable virtual channel identifierFour high-speed GPIOs (up to 2 Mbps each)Adaptive receive equalizationCompensates for channel insertion loss of up to –15.3 dB at 1.7 GHzProvides automatic temperature and cable aging compensationSPI control interfaces up to 3.3 MbpsI2C (master/slave) with 1-Mbps fast-mode plusSupports 7.1 multiple I2S (4 data) channelsAEC-Q100 qualified with the following results:Device temperature grade 2: –40°C to +105°C ambient operating temperatureSupports pixel clock frequency up to 170 MHz for WUXGA (1920×1200) and 1080p60 resolutions with 24-bit color depth1-lane or 2-lane FPD-Link III interface with de-skew capabilityMIPI®D-PHY / CSI-2 transmitterCSI-2 output ports with selectable 2- or 4-lane operation, up to 1.3 Gbps each laneVideo formats: RGB888/666/565, YUV422/420, RAW8/10/12Programmable virtual channel identifierFour high-speed GPIOs (up to 2 Mbps each)Adaptive receive equalizationCompensates for channel insertion loss of up to –15.3 dB at 1.7 GHzProvides automatic temperature and cable aging compensationSPI control interfaces up to 3.3 MbpsI2C (master/slave) with 1-Mbps fast-mode plusSupports 7.1 multiple I2S (4 data) channels
Description
AI
The DS90UB940N-Q1 is a FPD-Link III deserializer which, together with the DS90UB949/947/929-Q1 serializers, converts 1-lane or 2-lane FPD-Link III streams into a MIPI®CSI-2 format. The deserializer can operate over cost-effective, 50-Ω, single-ended coaxial or 100-Ω, differential shielded twisted-pair (STP) cables. The device recovers the data from one or two FPD-Link III serial streams and translates the data into a Camera Serial Interface (CSI-2) format that can support video resolutions up to WUXGA and 1080p60 with 24-bit color depth.
The FPD-Link III interface supports video and audio data transmission and full duplex control, including I2C and SPI communication, over the same differential link. Consolidation of video data and control over two differential pairs decreases the interconnect size and weight and simplifies the system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, and randomization. In backward compatible mode, the device supports up to WXGA and 720p resolutions with 24-bit color depth over a single differential link.
The device automatically senses the FPD-Link III channels and supplies a clock alignment and de-skew functionality without the need for any special training patterns. This ensures skew phase tolerance from mismatches in interconnect wires such as PCB trace routing, cable pair-to-pair length differences, and connector imbalances.
The DS90UB940N-Q1 is a FPD-Link III deserializer which, together with the DS90UB949/947/929-Q1 serializers, converts 1-lane or 2-lane FPD-Link III streams into a MIPI®CSI-2 format. The deserializer can operate over cost-effective, 50-Ω, single-ended coaxial or 100-Ω, differential shielded twisted-pair (STP) cables. The device recovers the data from one or two FPD-Link III serial streams and translates the data into a Camera Serial Interface (CSI-2) format that can support video resolutions up to WUXGA and 1080p60 with 24-bit color depth.
The FPD-Link III interface supports video and audio data transmission and full duplex control, including I2C and SPI communication, over the same differential link. Consolidation of video data and control over two differential pairs decreases the interconnect size and weight and simplifies the system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, and randomization. In backward compatible mode, the device supports up to WXGA and 720p resolutions with 24-bit color depth over a single differential link.
The device automatically senses the FPD-Link III channels and supplies a clock alignment and de-skew functionality without the need for any special training patterns. This ensures skew phase tolerance from mismatches in interconnect wires such as PCB trace routing, cable pair-to-pair length differences, and connector imbalances.
