NLSF595 Series

Tri-Color LED Driver

Catalog

Tri-Color LED Driver

Part	Voltage - Supply (Max)	Voltage - Supply (Min) [Min]	Package / Case [x]	Package / Case	Package / Case [y]	Mounting Type	Supplier Device Package	Type	Current - Output / Channel [custom]	Voltage - Output	Number of Outputs	Operating Temperature [Max]	Operating Temperature [Min]	Frequency
ON Semiconductor NLSF595DTR2G	5.5 V	2 V	0.173 in	16-TSSOP	4.4 mm	Surface Mount	16-TSSOP	Linear	12 mA	5.5 V	8	125 °C	-55 °C
ON Semiconductor NLSF595MNR2	5.5 V	2 V		16-VFQFN Exposed Pad		Surface Mount	16-QFN (3x3)		12 mA	5.5 V	8			150 MHz
ON Semiconductor NLSF595DTR2	5.5 V	2 V	0.173 in	16-TSSOP	4.4 mm	Surface Mount	16-TSSOP	Linear	12 mA	5.5 V	8	125 °C	-55 °C

Catalog

Tri-Color LED Driver

Key Features

• Parallel Outputs are Open Drain Capable of Sinking > 12 mA Output Withstands up to +7.0 Regardless of VCC

• Standard Serial (SPI) Interface, Data, Clock, Enable (Low)

• All Inputs CMOS Level Compatible

• Frees up I/O around a Microcontroller

• Only One Pin Dedicated to this Device (Latch Enable)

• Output Enable may be Permanently Pulled Low

• High Speed Clocking, fmax > 25 MHz (Shift Clock)

• Eight Bits Parallel Output

• Double Buffered Outputs, so Register may Fill without Affecting output

• STD CMOS Serial Output, may be used to Cascade more than One Device

• Each Part Controls Two Tri-Color LEDs

• Two Devices can Control 5 Tri-Color LEDs

• Low Leakage: ICC= 2.0 µA (Max) at TA= 25°C

• Latchup Performance Exceeds 100 mA

• TSSOP-16 Package

• ESD Performance: HBM > 1000 V; MM > 100 V

• Functionally Similar to the Popular 74VHC595

Description

The NLSF595 is advanced CMOS shift register with open drain outputs fabricated with 0.6 5m silicon gate CMOS technology. This device is used in conjunction with a microcontroller, with only one dedicated line. All pins have Overvoltage Protection that allows voltages above VCCup to 7.0 V to be present on the pins without damage or disruption of operation of the part, regardless of the operating voltage. This device may be used between 2.0 and 5.5 volts, the output driver level may be independent of supply voltage:0-7.0 volts.