SN74CBTLV16211 Series

6.5-pF, 3.3-V, 1:1 (SPST), 24-channel FET bus switch (SSOP, TSSOP, TVSOP packages)

Catalog

6.5-pF, 3.3-V, 1:1 (SPST), 24-channel FET bus switch (SSOP, TSSOP, TVSOP packages)

Part	Operating Temperature [Max]	Operating Temperature [Min]	Circuit [custom]	Circuit [custom]	Supplier Device Package	Voltage Supply Source	Mounting Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Independent Circuits	Type	Package / Case	Package / Case	Package / Case [y]	Supplier Device Package [x]	Supplier Device Package [y]	Package / Case	Package / Case
Texas Instruments SN74CBTLV16211VR	85 °C	-40 °C	1:1	12	56-TVSOP	Single Supply	Surface Mount	2.3 V	3.6 V	2	Bus Switch	0.173 in	56-TFSOP	4.4 mm
Texas Instruments 74CBTLV16211CZRDR	85 °C	-40 °C	1:1	12	54-BGA Microstar Junior	Single Supply	Surface Mount	2.3 V	3.6 V	2	Bus Switch		54-TFBGA		8	5.5
Texas Instruments SN74CBTLV16211GR	85 °C	-40 °C	1:1	12	56-TSSOP	Single Supply	Surface Mount	2.3 V	3.6 V	2	Bus Switch		56-TFSOP				6.1 mm	0.24 in
Texas Instruments SN74CBTLV16211DLR	85 °C	-40 °C	1:1	12	56-SSOP	Single Supply	Surface Mount	2.3 V	3.6 V	2	Bus Switch		56-BSSOP				7.5 mm	0.295 in
Texas Instruments 74CBTLV16211DLRG4	85 °C	-40 °C	1:1	12	56-SSOP	Single Supply	Surface Mount	2.3 V	3.6 V	2	Bus Switch		56-BSSOP				7.5 mm	0.295 in
Texas Instruments 74CBTLV16211CGRDR	85 °C	-40 °C	1:1	12	54-BGA Microstar Junior	Single Supply	Surface Mount	2.3 V	3.6 V	2	Bus Switch		54-TFBGA		8	5.5
Texas Instruments SN74CBTLV16211DL	85 °C	-40 °C	1:1	12	56-SSOP	Single Supply	Surface Mount	2.3 V	3.6 V	2	Bus Switch		56-BSSOP				7.5 mm	0.295 in

Catalog

6.5-pF, 3.3-V, 1:1 (SPST), 24-channel FET bus switch (SSOP, TSSOP, TVSOP packages)

Key Features

• Member of the Texas Instruments Widebus™ Family5-Switch Connection Between Two PortsRail-to-Rail Switching on Data I/O PortsIoffSupports Partial-Power-Down Mode OperationLatch-Up Performance Exceeds 250 mA Per JESD 17ESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)200-V Machine Model (A115-A)Widebus is a trademark of Texas Instruments.Member of the Texas Instruments Widebus™ Family5-Switch Connection Between Two PortsRail-to-Rail Switching on Data I/O PortsIoffSupports Partial-Power-Down Mode OperationLatch-Up Performance Exceeds 250 mA Per JESD 17ESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)200-V Machine Model (A115-A)Widebus is a trademark of Texas Instruments.

Description

The SN74CBTLV16211 provides 24 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as dual 12-bit bus switches with separate output-enable (OE\) inputs. It can be used as two 12-bit bus switches or as one 24-bit bus switch. When OE\ is low, the associated 12-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports. This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN74CBTLV16211 provides 24 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as dual 12-bit bus switches with separate output-enable (OE\) inputs. It can be used as two 12-bit bus switches or as one 24-bit bus switch. When OE\ is low, the associated 12-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports. This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.