NCV7420 Series

System Basis Chip with LIN and LDO Regulator

Catalog

System Basis Chip with LIN and LDO Regulator

Part	Type	Qualification	Duplex	Protocol	Voltage - Supply	Mounting Type	Grade	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case [x]	Package / Case [y]	Package / Case	Receiver Hysteresis	Voltage - Supply [Max]	Voltage - Supply [Min]	Data Rate
ON Semiconductor NCV7420D23R2G	Transceiver	AEC-Q100	Half	LINbus	3.3 V 5 V	Surface Mount	Automotive	125 °C	-40 °C	0.154 in	3.9 mm	14-SOIC	175 mV
ON Semiconductor NCV7420D25R2G	Transceiver	AEC-Q100	Half	LINbus	3.3 V 5 V	Surface Mount	Automotive	125 °C	-40 °C	0.154 in	3.9 mm	14-SOIC	175 mV
ON Semiconductor NCV7420C1	Transceiver	AEC-Q100	Half	LIN	5 V	Surface Mount	Automotive	125 °C	-40 °C	0.154 in	3.9 mm	14-SOIC	175 mV	26 V	6 V	20 kBd
ON Semiconductor NCV7420D26R2G	Transceiver		Half	LINbus	3.3 V 5 V	Surface Mount		125 °C	-40 °C	0.154 in	3.9 mm	14-SOIC	175 mV

Catalog

System Basis Chip with LIN and LDO Regulator

Key Features

• LIN compliant to specification revision 2.0 (backward compatible to version 1.3) and J2602

• I3T high voltage technology

• Bus voltage ±45 V

• Transmission rate up to 20 kbps

• Thermal shutdown

• Indefinite shortcircuit protection on pins LIN and WAKE towards supply and ground

• Load dump protection (45 V)

• Bus pins protected against transients in an automotive environment

• ESD protection level for LIN, INH, WAKE and Vbb up to ±8 kV

• Output voltage 5.0 V / 50 mA or 3.3 V / 50 mA

• Wakeup input

• Enable inputs for standby and sleep mode

• INH output for auxiliary purposes (switching of an external pullup or resistive divider towards battery,control of an external voltage regulator etc.)

• Integrated slope control

Description

The NCV7420 is a fully featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus. The transceiver is implemented in I3T technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip.The NCV7420 LIN device is a member of the in-vehicle networking (IVN) transceiver family of ON Semiconductor that integrates a LIN v2.0 physical transceiver and either a 3.3 V or a 5.0 V voltage regulator.The LIN bus is designed to communicate low rate data from control devices such as door locks, mirrors, car seats, and sunroofs at the lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node. Each node has a slave MCU state machine that recognizes and translates the instructions specific to that function. The main attraction of the LIN bus is that all the functions are not time critical and usually relate to passenger comfort.