DRV8210P Series

12-V, 1-A H-bridge motor driver, PWM control with low power sleep mode

Catalog

12-V, 1-A H-bridge motor driver, PWM control with low power sleep mode

Part	Interface	Operating Temperature [Min]	Operating Temperature [Max]	Package / Case	Motor Type - Stepper	Mounting Type	Motor Type - AC, DC	Voltage - Load [Min]	Voltage - Load [Max]	Applications	Voltage - Supply [Min]	Voltage - Supply [Max]	Function	Output Configuration	Supplier Device Package	Technology
Texas Instruments DRV8210DRLR	PWM	-40 °C	125 °C	SOT-563 SOT-666	Bipolar	Surface Mount	Brushed DC	1.65 V	11 V	Brushed DC Camera	1.65 V	11 V	Driver - Fully Integrated Control and Power Stage	Half Bridge (2)	SOT-563	NMOS
Texas Instruments DRV8210DSGR	PWM	-40 °C	125 °C	8-WFDFN Exposed Pad	Bipolar	Surface Mount	Brushed DC			Brushed DC	1.65 V	11 V	Driver - Fully Integrated Control and Power Stage		8-WSON (2x2)	NMOS
Texas Instruments DRV8210PDSGR	PWM	-40 °C	125 °C	8-WFDFN Exposed Pad	Bipolar	Surface Mount	Brushed DC			Brushed DC	1.65 V	11 V	Driver - Fully Integrated Control and Power Stage		8-WSON (2x2)	NMOS

Catalog

12-V, 1-A H-bridge motor driver, PWM control with low power sleep mode

Key Features

• N-channel H-bridge motor driverMOSFET on-resistance: HS + LS 1 ΩDrives one bidirectional brushed DC motorTwo unidirectional brushed DC motorsOne single- or dual-coil latching relayPush-pull and bistable solenoidsOther resistive, inductive, or LED loads1.65-V to 11-V operating supply voltage rangeHigh output current capability:Full-bridge: 1.76-A peakHalf-bridge: 1.76-A peak per outputParallel half-bridge: 3.52-A peakMultiple interfaces for flexibility and reduced GPIOStandard PWM Interface (IN1/IN2)Supports 1.8-V, 3.3-V, and 5-V logic inputsUltra low-power sleep mode<84.5 nA @ VVM= 5 V, VVCC= 3.3 V, TJ= 25°CTimed autosleep mode to reduce GPIOProtection featuresUndervoltage lockout (UVLO)Overcurrent protection (OCP)Thermal shutdown (TSD)Family of devices. See Device Comparison for details.DRV8210: 1.65-11 V, 1 Ω, multiple interfacesDRV8210P: Sleep pin, PWM interfaceDRV8212: 1.65-11 V, 280 mΩ, multiple interfacesDRV8212P: Sleep pin, PWM interfaceDRV8220: 4.5-18 V, 1 Ω, multiple interfacesN-channel H-bridge motor driverMOSFET on-resistance: HS + LS 1 ΩDrives one bidirectional brushed DC motorTwo unidirectional brushed DC motorsOne single- or dual-coil latching relayPush-pull and bistable solenoidsOther resistive, inductive, or LED loads1.65-V to 11-V operating supply voltage rangeHigh output current capability:Full-bridge: 1.76-A peakHalf-bridge: 1.76-A peak per outputParallel half-bridge: 3.52-A peakMultiple interfaces for flexibility and reduced GPIOStandard PWM Interface (IN1/IN2)Supports 1.8-V, 3.3-V, and 5-V logic inputsUltra low-power sleep mode<84.5 nA @ VVM= 5 V, VVCC= 3.3 V, TJ= 25°CTimed autosleep mode to reduce GPIOProtection featuresUndervoltage lockout (UVLO)Overcurrent protection (OCP)Thermal shutdown (TSD)Family of devices. See Device Comparison for details.DRV8210: 1.65-11 V, 1 Ω, multiple interfacesDRV8210P: Sleep pin, PWM interfaceDRV8212: 1.65-11 V, 280 mΩ, multiple interfacesDRV8212P: Sleep pin, PWM interfaceDRV8220: 4.5-18 V, 1 Ω, multiple interfaces

Description

The DRV8210 is an integrated motor driver with four N-channel power FETs, charge pump regulator, and protection circuitry. The tripler charge pump architecture allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors to reduce the overall solution size of the motor driver on a PCB and allows for 100% duty cycle operation. The DRV8210 supports multiple control interface modes including: PWM (IN1/IN2), phase/enable (PH/EN), independent half-bridge, and parallel half-bridge. Each interface supports a low-power sleep mode to achieve ultra-low quiescent current draw by shutting down most of the internal circuitry. The device can supply up to 1.76-A peak output current. It operates with a supply voltage from 1.65 V to 5.5 V. The driver offers robust internal protection features include supply undervoltage lockout (UVLO), output overcurrent (OCP), and device overtemperature (TSD). The DRV8210 is part of a family of devices which come in pin-to-pin scalable RDS(on)and supply voltage options to support various loads and supply rails with minimal design changes. See Device Comparison for information on the devices in this family. View our full portfolio ofbrushed motor driverson ti.com. The DRV8210 is an integrated motor driver with four N-channel power FETs, charge pump regulator, and protection circuitry. The tripler charge pump architecture allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors to reduce the overall solution size of the motor driver on a PCB and allows for 100% duty cycle operation. The DRV8210 supports multiple control interface modes including: PWM (IN1/IN2), phase/enable (PH/EN), independent half-bridge, and parallel half-bridge. Each interface supports a low-power sleep mode to achieve ultra-low quiescent current draw by shutting down most of the internal circuitry. The device can supply up to 1.76-A peak output current. It operates with a supply voltage from 1.65 V to 5.5 V. The driver offers robust internal protection features include supply undervoltage lockout (UVLO), output overcurrent (OCP), and device overtemperature (TSD). The DRV8210 is part of a family of devices which come in pin-to-pin scalable RDS(on)and supply voltage options to support various loads and supply rails with minimal design changes. See Device Comparison for information on the devices in this family. View our full portfolio ofbrushed motor driverson ti.com.