MC100EL1648 Series

Voltage Controlled Oscillator, ECL, 5.0 V

Catalog

Voltage Controlled Oscillator, ECL, 5.0 V

Part	Type	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply [Max]	Voltage - Supply [Min]	Mounting Type	Frequency	Current - Supply	Supplier Device Package	Package / Case	Package / Case [custom]	Package / Case	Package / Case [x]	Package / Case [y]
ON Semiconductor MC100EL1648DTG	VCO	85 °C	-40 °C	5.5 V	4.2 V	Surface Mount	1100 MHz	19 mA	8-TSSOP	8-MSOP 8-TSSOP	0.118 in	3 mm
ON Semiconductor MC100EL1648MG	VCO	85 °C	-40 °C	5.5 V	4.2 V	Surface Mount	1100 MHz	19 mA	SOEIAJ-14	14-SOIC			0.209 "	5.3 mm
ON Semiconductor MC100EL1648DG	VCO	85 °C	-40 °C	5.5 V	4.2 V	Surface Mount	1100 MHz	19 mA	8-SOIC	8-SOIC			0.154 in	3.9 mm

Catalog

Voltage Controlled Oscillator, ECL, 5.0 V

Key Features

• Typical Operating Frequency Up to 1100 MHz

• Low-Power 19 mA at 5.0 Vdc Power Supply

• Phase Noise -90 dBc/Hz at 25 kHz Typical

• ESD Protection: >2 KV HBM, >100 V MM

• PECL Mode Operating Range: VCC= 5.0 V with VEE= 0 V

• NECL Mode Operating Range: VCC= 0 V with VEE= -5.2 V

• Input Capacitance= 6.0 pF (TYP)

• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test

• Maximum Series Resistance for L (External Inductance)= 50W(TYP)

• Moisture Sensitivity Level 1. For Additional Information, see Application Note AND8003/D

• Flammability Rating: UL-94 code V-0 @ 1/8?, Oxygen Index 28 to 34

• Transistor Count = 11 devices

• Pb-Free Packages are Available

Description

The MC100EL1648 requires an external parallel tank circuit consisting of the inductor (L) and capacitor (C). A varactor diode may be incorporated into the tank circuit to provide a voltage variable input for the oscillator (VCO). This device may also be used in many other applications requiring a fixed frequency clock. The MC100EL1648 is ideal in applications requiring a local oscillator. Systems include electronic test equipment and digital high-speed telecommunications.The MC100EL1648 is based on the VCOcircuit topology of the MC1648. The MC100EL1648 uses advanced bipolar process technology which results in a design which can operate at an extended frequency range.The ECL output circuitry of the MC100EL1648 is not a traditional open emitter output structure and instead has an on-chip termination resistor with a nominal value of 510 ohms. This facilitates direct ac-coupling of the output signal into a transmission line. Because of this output configuration, an external pull-down resistor is not required to provide the output with a dc current path. This output is intended to drive one ECL load. If the user needs to fanout the signal, an ECL buffer such as the MC10EL16 Line Receiver/Driver should be usedNOTE: The MC100EL1648 is NOT useable as a crystal oscillator.