Zenode.ai Logo
Beta

NOA1213 Series

Ambient Light Sensor with Dark Current Compensation

Manufacturer: ON Semiconductor

Catalog

Ambient Light Sensor with Dark Current Compensation

Key Features

Photopic Spectral Response
Senses Ambient Light and Provides an Output Current Proportional to the Ambient Light Intensity
Dynamic Dark Current Compensation
Three Selectable Output Current Gain Modes in Approximately 10x Steps
Power Down Mode
Less than 18 A at 100 lux Active Power Consumption in Medium Gain Mode (Less than 8 A at Dark)
Less than 200 pA Quiescent Power Dissipation in Power Down Mode at All Light Levels
Linear Response Over the Full Operating Range
Senses Intensity of Ambient Light from ~0 lux to Over 100,000 lux
Wide Operating Temperature Range (−40°C to 85°C)
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
Drop−in Replacement Device in 1.6 x 1.6 mm Package

Description

AI
The NOA1213 is a very low power ambient light sensor (ALS) withan analog current output and a power down mode to conserve power.Designed primarily for handheld device applications, the active powerdissipation of this chip is less than 8 A at dark and its quiescentcurrent consumption is less than 200 pA in power down mode. Thedevice can operate over a very wide range of voltages from 2 V to5.5 V. The NOA1213 employs proprietary CMOS image sensingtechnology from ON Semiconductor, including built−in dynamic darkcurrent compensation to provide large signal to noise ratio (SNR) andwide dynamic range (DR) over the entire operating temperature range.The photopic optical filter provides a light response similar to that ofthe human eye. Together the photopic light response and dark currentcompensation insures accurate light level detection.