CC430F5147 Series

16-Bit ultra-low-power CC430 Sub 1 GHz wireless MCU with 10-bit ADC, 32kB Flash and 4kB RAM

Catalog

16-Bit ultra-low-power CC430 Sub 1 GHz wireless MCU with 10-bit ADC, 32kB Flash and 4kB RAM

Part	Data Rate (Max)	Current - Transmitting [Min]	Current - Transmitting [Max]	Current - Receiving [Max]	Current - Receiving [Min]	Mounting Type	Voltage - Supply [Max]	Voltage - Supply [Min]	Serial Interfaces	Frequency [Max]	Frequency [Min]	Sensitivity	Supplier Device Package	Package / Case	GPIO	RF Family/Standard	Power - Output	Type	Modulation	Operating Temperature [Max]	Operating Temperature [Min]
Texas Instruments CC430F5147IRGZR	500 kBaud	15 mA	36 mA	18.5 mA	15 mA	Surface Mount	3.6 V	2 V	I2C IrDA JTAG SPI UART	348 MHz 464 MHz 928 MHz	300 MHz 389 MHz 779 MHz	-117 dBm	48-VQFN (7x7)	48-VFQFN Exposed Pad	30	General ISM < 1GHz	13 dBm	TxRx + MCU	2FSK 2GFSK ASK MSK OOK	85 °C	-40 °C
Texas Instruments CC430F5147IRGZT	500 kBaud	15 mA	36 mA	18.5 mA	15 mA	Surface Mount	3.6 V	2 V	I2C IrDA JTAG SPI UART	348 MHz 464 MHz 928 MHz	300 MHz 389 MHz 779 MHz	-117 dBm	48-VQFN (7x7)	48-VFQFN Exposed Pad	30	General ISM < 1GHz	13 dBm	TxRx + MCU	2FSK 2GFSK ASK MSK OOK	85 °C	-40 °C

Catalog

16-Bit ultra-low-power CC430 Sub 1 GHz wireless MCU with 10-bit ADC, 32kB Flash and 4kB RAM

Key Features

• True System-on-Chip (SoC) for Low-Power Wireless Communication ApplicationsWide Supply Voltage Range:3.6 V Down to 1.8 VUltra-Low Power Consumption:CPU Active Mode (AM): 160 µA/MHzStandby Mode (LPM3 RTC Mode): 2.0 µAOff Mode (LPM4 RAM Retention): 1.0 µAReal-Time Clock (RTC) Only Mode (LPM3.5): 1.0 µAShutdown Mode (LPM4.5): 0.3 µARadio in RX: 15 mA, 250 kbps, 915 MHzMSP430™ System and Peripherals16-Bit RISC Architecture, Extended Memory, up to 20-MHz System ClockWake up From Standby Mode in Less Than 6 µsFlexible Power-Management System With SVS and BrownoutUnified Clock System With FLL16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers16-Bit Timer TA1, Timer_A With Three Capture/Compare RegistersHardware RTCTwo Universal Serial Communication Interfaces (USCIs)USCI_A0 Supports UART, IrDA, SPIUSCI_B0 Supports I2C, SPI10-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Features (Only CC430F614x and CC430F514x)ComparatorIntegrated LCD Driver With Contrast Control for up to 96 Segments (Only CC430F614x)128-Bit AES Security Encryption and Decryption Coprocessor32-Bit Hardware Multiplier3-Channel Internal DMASerial Onboard Programming, No External Programming Voltage NeededEmbedded Emulation Module (EEM)High-Performance Sub-1 GHz RF Transceiver CoreSame as in CC1101Wide Supply Voltage Range: 2 V to 3.6 VFrequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to 928 MHzProgrammable Data Rate From 0.6 kBaud to 500 kBaudHigh Sensitivity (–117 dBm at 0.6 kBaud, –111 dBm at 1.2 kBaud, 315 MHz, 1% Packet Error Rate)Excellent Receiver Selectivity and Blocking PerformanceProgrammable Output Power up to +12 dBm for All Supported Frequencies2-FSK, 2-GFSK, and MSK Supported, Also OOK and Flexible ASK ShapingFlexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word Detection, Address Check, Flexible Packet Length, and Automatic CRC HandlingSupport for Automatic Clear Channel Assessment (CCA) Before Transmitting (for Listen-Before-Talk Systems)Digital RSSI OutputSuited for Systems Targeting Compliance With EN 300 220 (Europe) and FCC CFR Part 15 (US)Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN 13757‑4:2005Support for Asynchronous and Synchronous Serial Receive/Transmit Mode for Backward Compatibility With Existing Radio Communication ProtocolsDevice Comparison Summarizes the Available Family MembersTrue System-on-Chip (SoC) for Low-Power Wireless Communication ApplicationsWide Supply Voltage Range:3.6 V Down to 1.8 VUltra-Low Power Consumption:CPU Active Mode (AM): 160 µA/MHzStandby Mode (LPM3 RTC Mode): 2.0 µAOff Mode (LPM4 RAM Retention): 1.0 µAReal-Time Clock (RTC) Only Mode (LPM3.5): 1.0 µAShutdown Mode (LPM4.5): 0.3 µARadio in RX: 15 mA, 250 kbps, 915 MHzMSP430™ System and Peripherals16-Bit RISC Architecture, Extended Memory, up to 20-MHz System ClockWake up From Standby Mode in Less Than 6 µsFlexible Power-Management System With SVS and BrownoutUnified Clock System With FLL16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers16-Bit Timer TA1, Timer_A With Three Capture/Compare RegistersHardware RTCTwo Universal Serial Communication Interfaces (USCIs)USCI_A0 Supports UART, IrDA, SPIUSCI_B0 Supports I2C, SPI10-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Features (Only CC430F614x and CC430F514x)ComparatorIntegrated LCD Driver With Contrast Control for up to 96 Segments (Only CC430F614x)128-Bit AES Security Encryption and Decryption Coprocessor32-Bit Hardware Multiplier3-Channel Internal DMASerial Onboard Programming, No External Programming Voltage NeededEmbedded Emulation Module (EEM)High-Performance Sub-1 GHz RF Transceiver CoreSame as in CC1101Wide Supply Voltage Range: 2 V to 3.6 VFrequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to 928 MHzProgrammable Data Rate From 0.6 kBaud to 500 kBaudHigh Sensitivity (–117 dBm at 0.6 kBaud, –111 dBm at 1.2 kBaud, 315 MHz, 1% Packet Error Rate)Excellent Receiver Selectivity and Blocking PerformanceProgrammable Output Power up to +12 dBm for All Supported Frequencies2-FSK, 2-GFSK, and MSK Supported, Also OOK and Flexible ASK ShapingFlexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word Detection, Address Check, Flexible Packet Length, and Automatic CRC HandlingSupport for Automatic Clear Channel Assessment (CCA) Before Transmitting (for Listen-Before-Talk Systems)Digital RSSI OutputSuited for Systems Targeting Compliance With EN 300 220 (Europe) and FCC CFR Part 15 (US)Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN 13757‑4:2005Support for Asynchronous and Synchronous Serial Receive/Transmit Mode for Backward Compatibility With Existing Radio Communication ProtocolsDevice Comparison Summarizes the Available Family Members

Description

The TI CC430 family of ultra-low-power system-on-chip microcontrollers with integrated RF transceiver cores consists of several devices featuring different sets of peripherals targeted for a wide range of applications. The architecture, combined with seven low-power modes (including LPM3.5 and LMP4.5), is optimized to achieve extended battery life in portable measurement applications. The device features the powerful MSP430 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The CC430 family provides a tight integration between the microcontroller core, its peripherals, software, and the RF transceiver, making these true system-on-chip solutions easy to use as well as improving performance. The CC430F614x series are microcontroller system-on-chip configurations combining the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 10-bit ADC with eight external inputs plus internal temperature and battery sensors, a comparator, USCIs, a 128-bit AES security accelerator, a hardware multiplier, DMA, an RTC module with alarm capabilities, an LCD driver, and up to 44 I/O pins. The CC430F514x and CC430F512x series are microcontroller system-on-chip configurations combining the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 10-bit ADC with six external inputs plus internal temperature and battery sensors on CC430F514x devices, a comparator, a USCI, a 128-bit AES security accelerator, a hardware multiplier, DMA, an RTC module with alarm capabilities, and up to 30 I/O pins. For complete module descriptions, see theCC430 Family User’s Guide. The TI CC430 family of ultra-low-power system-on-chip microcontrollers with integrated RF transceiver cores consists of several devices featuring different sets of peripherals targeted for a wide range of applications. The architecture, combined with seven low-power modes (including LPM3.5 and LMP4.5), is optimized to achieve extended battery life in portable measurement applications. The device features the powerful MSP430 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The CC430 family provides a tight integration between the microcontroller core, its peripherals, software, and the RF transceiver, making these true system-on-chip solutions easy to use as well as improving performance. The CC430F614x series are microcontroller system-on-chip configurations combining the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 10-bit ADC with eight external inputs plus internal temperature and battery sensors, a comparator, USCIs, a 128-bit AES security accelerator, a hardware multiplier, DMA, an RTC module with alarm capabilities, an LCD driver, and up to 44 I/O pins. The CC430F514x and CC430F512x series are microcontroller system-on-chip configurations combining the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 10-bit ADC with six external inputs plus internal temperature and battery sensors on CC430F514x devices, a comparator, a USCI, a 128-bit AES security accelerator, a hardware multiplier, DMA, an RTC module with alarm capabilities, and up to 30 I/O pins. For complete module descriptions, see theCC430 Family User’s Guide.