CC3135 Series

SimpleLink™ 32-bit Arm Cortex-M3 dual-band Wi-Fi® wireless network processor

Catalog

SimpleLink™ 32-bit Arm Cortex-M3 dual-band Wi-Fi® wireless network processor

Part	RF Family/Standard	Frequency [Min]	Frequency [Max]	Package / Case	Mounting Type	Current - Receiving	Operating Temperature [Max]	Operating Temperature [Min]	Serial Interfaces	Protocol	Power - Output	Supplier Device Package	GPIO	Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Modulation	Data Rate (Max) [Max]	Current - Transmitting
Texas Instruments CC3135RNMRGKR	WiFi	2.412 GHz 5.18 GHz	2.472 GHz 5.825 GHz	64-VFQFN Exposed Pad	Surface Mount	61 mA	85 °C	-40 °C	SPI UART	802.11a/b/g/n	18.3 dBm	64-VQFN (9x9)	2	TxRx + MCU	2.1 V	3.6 V	CCK DSSS OFDM	54 Mbps	318 mA

Catalog

SimpleLink™ 32-bit Arm Cortex-M3 dual-band Wi-Fi® wireless network processor

Key Features

• Integrated dual-band Wi-Fi and internet protocols802.11a/b/g/n: 2.4GHz and 5GHzFIPS 140-2 Level 1 certificationRich set of IoT security features helps developers protect dataLow-power modes for battery powered applicationCoexistence with 2.4GHz radiosIndustrial temperature: –40°C to +85°CTransferable Wi-Fi Alliance certificationWi-Fi network processor subsystem:Wi-Fi core:802.11a/b/g/n 2.4GHz and 5GHzModes:Access point (AP)Station (STA)Wi-Fi Direct (only supported on 2.4GHz)Security:WEPWPA™/ WPA2™ PSKWPA2 EnterpriseWPA3™ PersonalWPA3™ EnterpriseInternet and application protocols:HTTPs server, mDNS, DNS-SD, DHCPIPv4 and IPv6 TCP/IP stack16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)Built-in power management subsystem:Configurable low-power profiles (always, intermittent, tag)Advanced low-power modesIntegrated DC/DC regulatorsMultilayered security features:Separate execution environmentsNetworking securityDevice identity and keyHardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)Application-level security (encryption, authentication, access control)Initial secure programmingSoftware tamper detectionSecure bootCertificate signing request (CSR)Unique per device key pairApplication throughput:UDP: 16Mbps, TCP: 13MbpsPeak: 72MbpsPower-management subsystemIntegrated DC/DC converters support a wide range of supply voltage:VBAT wide-voltage mode: 2.1V to 3.6VVIO is always tied with VBATAdvanced low-power modes:Shutdown: 1µA, hibernate: 4µALow-power deep sleep (LPDS): 120µAIdle connected (MCU in LPDS): 710µARX traffic (MCU active): 53mATX traffic (MCU active): 223mAWi-Fi TX power:2.4GHz: 18.0dBm at 1 DSSS5GHz: 18.1dBm at 6 OFDMWi-Fi RX sensitivity:2.4GHz: –96dBm at 1 DSSS5GHz: –92dBm at 6 OFDMClock source:40.0MHz crystal with internal oscillator32.768kHz crystal or external RTCRGK package64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitchDevice supportsSimpleLink™ MCU Platformdeveloper’s ecosystemIntegrated dual-band Wi-Fi and internet protocols802.11a/b/g/n: 2.4GHz and 5GHzFIPS 140-2 Level 1 certificationRich set of IoT security features helps developers protect dataLow-power modes for battery powered applicationCoexistence with 2.4GHz radiosIndustrial temperature: –40°C to +85°CTransferable Wi-Fi Alliance certificationWi-Fi network processor subsystem:Wi-Fi core:802.11a/b/g/n 2.4GHz and 5GHzModes:Access point (AP)Station (STA)Wi-Fi Direct (only supported on 2.4GHz)Security:WEPWPA™/ WPA2™ PSKWPA2 EnterpriseWPA3™ PersonalWPA3™ EnterpriseInternet and application protocols:HTTPs server, mDNS, DNS-SD, DHCPIPv4 and IPv6 TCP/IP stack16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)Built-in power management subsystem:Configurable low-power profiles (always, intermittent, tag)Advanced low-power modesIntegrated DC/DC regulatorsMultilayered security features:Separate execution environmentsNetworking securityDevice identity and keyHardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)Application-level security (encryption, authentication, access control)Initial secure programmingSoftware tamper detectionSecure bootCertificate signing request (CSR)Unique per device key pairApplication throughput:UDP: 16Mbps, TCP: 13MbpsPeak: 72MbpsPower-management subsystemIntegrated DC/DC converters support a wide range of supply voltage:VBAT wide-voltage mode: 2.1V to 3.6VVIO is always tied with VBATAdvanced low-power modes:Shutdown: 1µA, hibernate: 4µALow-power deep sleep (LPDS): 120µAIdle connected (MCU in LPDS): 710µARX traffic (MCU active): 53mATX traffic (MCU active): 223mAWi-Fi TX power:2.4GHz: 18.0dBm at 1 DSSS5GHz: 18.1dBm at 6 OFDMWi-Fi RX sensitivity:2.4GHz: –96dBm at 1 DSSS5GHz: –92dBm at 6 OFDMClock source:40.0MHz crystal with internal oscillator32.768kHz crystal or external RTCRGK package64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitchDevice supportsSimpleLink™ MCU Platformdeveloper’s ecosystem

Description

Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3135 device, a dual-band wireless network processor from Texas Instruments. The CC3135 Wi-Fi® Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, to offload networking activities from the host MCU. The subsystem includes a dual-band 802.11a/b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built-in power management for best-in-class low-power performance. The Wi-Fi CERTIFIED® CC3135 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature. This generation introduces new capabilities that further simplify the connectivity of things to the Internet. The main new features include: The CC3135 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency). The CC3135 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz and host MCUs. For more information, visitwww.ti.com/simplelink. Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3135 device, a dual-band wireless network processor from Texas Instruments. The CC3135 Wi-Fi® Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, to offload networking activities from the host MCU. The subsystem includes a dual-band 802.11a/b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built-in power management for best-in-class low-power performance. The Wi-Fi CERTIFIED® CC3135 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature. This generation introduces new capabilities that further simplify the connectivity of things to the Internet. The main new features include: The CC3135 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency). The CC3135 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz and host MCUs. For more information, visitwww.ti.com/simplelink.