Catalog
Quadruple Low-Power Differential Line Receiver
Key Features
• Meets EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11Designed to Operate With Pulse Durations as Short as 20 nsDesigned for Multipoint Transmission on Long Bus Lines in Noisy EnvironmentsInput Sensitivity...±200 mVLow-Power Consumption...20 mA MaxOpen-Circuit Fail-Safe DesignCommon-Mode Input Voltage Range of-7 V to 12 VLinBiCMOS is a trademark of Texas Instruments.Meets EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11Designed to Operate With Pulse Durations as Short as 20 nsDesigned for Multipoint Transmission on Long Bus Lines in Noisy EnvironmentsInput Sensitivity...±200 mVLow-Power Consumption...20 mA MaxOpen-Circuit Fail-Safe DesignCommon-Mode Input Voltage Range of-7 V to 12 VLinBiCMOS is a trademark of Texas Instruments.
Description
AI
The SN55LBC175 is a monolithic quadruple differential line receiver with 3-state outputs and is designed to meet the requirements of the EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device is optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ±200 mV over a common-mode input voltage range of 12 V to -7 V. Fail-safe design ensures that if the inputs are open-circuited, the outputs are always high. This device is designed using the Texas Instruments proprietary LinBiCMOSTMtechnology allowing low power consumption, high switching speeds, and robustness.
This device offers optimum performance when used with the SN55LBC174 quadruple line driver. The SN55LBC175 is available in the 16-pin CDIP (J) package, a 16-pin CPAK (W) package, or a 20-pin LCCC (FK) package.
The SN55LBC175 is characterized over the military temperature range of -55°C to 125°C.
The SN55LBC175 is a monolithic quadruple differential line receiver with 3-state outputs and is designed to meet the requirements of the EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device is optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ±200 mV over a common-mode input voltage range of 12 V to -7 V. Fail-safe design ensures that if the inputs are open-circuited, the outputs are always high. This device is designed using the Texas Instruments proprietary LinBiCMOSTMtechnology allowing low power consumption, high switching speeds, and robustness.
This device offers optimum performance when used with the SN55LBC174 quadruple line driver. The SN55LBC175 is available in the 16-pin CDIP (J) package, a 16-pin CPAK (W) package, or a 20-pin LCCC (FK) package.
The SN55LBC175 is characterized over the military temperature range of -55°C to 125°C.
